GENERAL INFORMATION ABOUT OUR TECHNOLOGY – The technology incorporated
most successful in the world today the decision of the production of
ferrous, nonferrous, rare metals and preparation of nuclear fuel as
pyrometallurgical and hydrometallurgical processing, and
and our radically new method.
On our technology
extracted all the metals that are in the raw material for one cycle in the form
individual metal powders. According to the known technology today -
only one metal or more.
Even the processing of “poor” (% contents of individual metals in raw
materials), but the “rich” (in terms of different metals in the feed)
for this technology – it
to super production.
For example, aluminum production (in
Compared with the conventional technology on the principle of Faraday) in our
technology more attractive than from the salt melt.Aluminum can
receive from any aluminum-containing raw materials (including industrial waste)
with much less energy consumption, multifunctional.
On our technology cleaner production – no
fluoride emissions, degradation products of anode paste and dusting
supply of raw materials in the cell, causing severe disease.
Technology saves electrical energy and resources, all reagents are
regenerated and
reused, virtually no emissions and waste.
In some cases, depending on geological conditions of occurrence
natural resources, possibly underground leaching (extraction)
metals without excavation and rock material breach of integrity
earth’s surface. After many years of accumulated research and
systematized information on reserves of ore, silica,
chemistry of natural and man-made regional raw materials
using data geolkomov Kuzbass, Khakassia, Tuva, a number of
institutions and others from the standpoint of business. Brief essence
technology – selective non-waste production of a comprehensive
kinds of metals from raw materials for one cycle in the form of individual
energy-ultrafine metal crystals with a purity
more than 99,9%. Cost not more than $ 270 per ton, regardless of the form
allocated to the metal. Possible options for the production of filamentous
crystals and so-called “small particles” with special
properties, as well as metals of high purity. Any mineral
metal-containing raw materials consist of metals and nonmetals
(Metalloids), various minerals, soluble and insoluble
various solvents. In our case, all the metals are transferred to
solution in any sequence are extracted, and from the insoluble
Conventional acids silicate residue (sand) in the form of silicon dioxide,
diopside, etc. depending on the feedstock used, after washing
Produced commercial powder. Silicate residue feedstock in the form of commodity
powder at a cost of $ 4 per ton can be used in concrete,
glass, ceramics, production of semiconductor silicon, etc.
Thus, the raw material (ore, industrial waste) can be used
non-waste.
APPLICATION – in metallurgy total and low-temperature powder with
give a strong and lightweight technical details (because
energy saturation and filamentary metals produced)
machinery, aircraft, electronics and catalysis.
Whiskers and small metal particles “(used for example in aircraft
stealth-type” Stels “) may be used in
Spetstekhnologia. This nanotechnology. Metals in high purity
alternative energy, such as environmentally safe receipt
high-purity silicon metal with a lower cost for
solar panels. For example, it is advantageous to obtain a direct separation of
metals from two commercial concentrates our neighbors Sora
Molybdenum Combine Khakassia, avoiding complex and expensive
production stages in Chelyabinsk – molybdenum, copper, tin,
rhenium, osmium, lead, silver, gold ……… etc., which are in
concentrates.
There are prerequisites for applying the method in studies on
the hydrogen motor fuel.
The technology – the project is recommended as an alternative
highly profitable model of balanced use of mineral
minerals and waste already accumulated tonnage of industrial
waste, and the key outputfrom the state of environmental c
 Respect
 JSC URALSERVIS GROUP
(SOLARUS ENERGY Ltd)
VLADIMIR KARASEV
 
 
Email: vladimirkarasev1@gmail.com